With
time, technology has also changed and too for the good. At one point
in time, huge manpower was needed to break through rocks and other
concrete material. This not only took much time but wasted energy and
resources as well. But, today hydraulic hammers make the jobs simple
and convenient. These hammers that are attached to excavators, help
break through rocks and concrete material.
When
used properly and maintained well, hydraulic hammers ought to last
longer without wear and tear. These hydraulic breaker hammers
further have a tool bit attached to it, that are non-rotary cutting
tools used to make an actual job happen.
Wondering
about how to properly use tool bits in order to increase productivity
and enhance the hammer’s life? Read on, to find out.
Recommended
Procedure to Use Tool Bits
-
Lubrication:
Whenever inserting tool bits into the hammer, prior to usage, it is
highly recommended to apply lubricant or grease to it. Repeat this
greasing process at least 4 times a day for ensuring that the
lubricant stays intact.
-
Working
Angle:
When putting to use, prefer taking shank, chuck and the carrier as a
single unit. By this, it means that the striking angle of the
hydraulic hammer should be 900
sharp.
Bending the tool bit is not at all a good idea.
-
Prevent
Blank Firing:
Prior to using tool bits, prefer touching the hydraulic
breaker hammer on
the working surface. Ensure that the tool bit of the hammer is
touching the working surface. This will, in turn, help prevent blank
firing.
-
Striking
Limit:
Do keep in mind to limit the strike rate to 10-20 seconds in one go.
Never use the bit beyond this time in one single go as this can lead
to tool bit heating. Also, once you remove the hammer from one
single strike, choose a new striking angle for the second go.
The
good thing is that there are a number of hydraulic hammers for sale
in the market that abide by the standards of quality, offer automated
technology and also make servicing available in order to ease the
maintenance of the hammers and the underlying tool bits. But, it is
always better to be safe than sorry. So follow these tips to add life
to the hydraulic hammer tool bits.
Comments
Post a Comment